Unit rationale, description and aim

Knowledge of the properties of metal materials and the ability to apply that knowledge confidently to the safe design, production and critical evaluation of products made from metal are valued in professional contexts that relate to product design. This unit also contributes to an accredited sequence of industrial technologies units that is recognised by state-based Initial Teacher Education standards authorities (NESA, VIT and QCT) and aligns with the Australian Curriculum: Design and Technologies.

In this unit, students will learn to identify, select and evaluate principles, properties and performance characteristics of metal materials and their suitability for design applications. The unit will also develop competence in the selection and safe use of appropriate metal manufacturing techniques and equipment.

The aim of this unit is for students to explore a range of metal design and manufacturing technologies and apply these skills and knowledge to their own designs.

2025 10

Campus offering

Find out more about study modes.

Unit offerings may be subject to minimum enrolment numbers.

Please select your preferred campus.

  • Term Mode
  • Semester 2Multi-mode

Prerequisites

TECH105 Design Principles

Learning outcomes

To successfully complete this unit you will be able to demonstrate you have achieved the learning outcomes (LO) detailed in the below table.

Each outcome is informed by a number of graduate capabilities (GC) to ensure your work in this, and every unit, is part of a larger goal of graduating from ACU with the attributes of insight, empathy, imagination and impact.

Explore the graduate capabilities.

Define and describe principles of design in metal ...

Learning Outcome 01

Define and describe principles of design in metal technologies
Relevant Graduate Capabilities: GC1, GC2, GC9, GC11

Select and use a range of materials, tools and equ...

Learning Outcome 02

Select and use a range of materials, tools and equipment competently and safely in the design and manufacture of metal products
Relevant Graduate Capabilities: GC1, GC2, GC3, GC8, GC9

Interpret and apply principles of design in metal ...

Learning Outcome 03

Interpret and apply principles of design in metal technologies using diagrammatic, graphic and text-based conventions
Relevant Graduate Capabilities: GC1, GC2, GC9, GC10, GC11

Evaluate designed products and iterative design pr...

Learning Outcome 04

Evaluate designed products and iterative design processes utilising principles of design in metal with consideration of social, ethical and sustainability impacts
Relevant Graduate Capabilities: GC1, GC2, GC3, GC6, GC7, GC9, GC11

Content

Design Issues 

  • classification, structure and properties of metals 
  • analysis of properties and performance characteristics of metals 
  • selection criteria for the use of metals 
  • designing with metals 
  • case studies and examples from small-scale workshops to industry  
  • sustainability issues in metal  
  • Environmental Sustainability Charter (ESC) for steel  
  • Sustainability strategies suitable for other metals and metal products  
  • Analysis of design issues specific to metal  
  • Critiquing of existing metal products in terms of their ability to address user/s needs, and their impact (social, ethical and sustainability) 
  • Analysis of quality attributes specific to metal design  
  • Computer aided design in metal  
  • Computer aided manufacturing in metal  
  • Sourcing and processing of metals 
  • production techniques and processes and their impact on design  
  • production planning methods 
  • emerging and innovative metal technologies  

Graphics and design communication techniques for Metal and Industrial Design 

  • AS100 drawing standards 
  • freehand drawing 
  • rendering techniques 
  • workshop drawings – detail and assembly 
  • solid geometry 
  • developments and templates 
  • design communication techniques and conventions specific to Metal Design  

Product making 

  • measuring and marking out tools and techniques 
  • cutting, shaping and joining techniques 
  • finishing techniques 
  • hand and machine tools 
  • equipment maintenance 

WHS 

  • Workplace health and safety and safe working environments 
  • Risk assessment and management processes 
  • Safe Operating Procedures 
  • Development of Safe Work Management Statements 

Design and manufacture projects using metals as the primary material 

  • planning and project management of metal-based design projects  
  • design and manufacture of metal-based design projects 

Technologies Workshop Safety

  • Management practices for technology teachers including safety and risk management, budgeting, selecting, storing, maintaining and replacing materials, equipment and other resources related to Metal technologies

Assessment strategy and rationale

The problem-based learning strategy employed in this unit is supported by the integration of progressive authentic assessment tasks completed at critical points in the students’ learning. Theoretical conceptual knowledge and practical skills-based knowledge are developed simultaneously in that acquisition and assimilation of knowledge develops during application in design practices. Initially, students acquire knowledge in metal by undertaking research and developing a report on key concepts introduced in the lecture and develop skills in design and manufacture through practical workshop classes. Safe work practices are introduced in workshops and assessed through a hurdle task. Practical workshops provide opportunities for formative assessment which supports the assimilation of knowledge. The summative assessment aims to assess students’ application of knowledge and skills (conceptual, procedural and professional) competencies holistically using an integrated approach common in design education which focuses on the assessment of an entire design activity rather than specific elements in isolation. In this unit, the method aims to assess students’ achievement of a synthesis between design theory and practice in metal. Therefore, the main assessment method used is design projects which include two components, a design documentation folio and a designed and manufactured product or products. Folios document students' design processes and include evidence of identifying and defining a need, research, ideation, prototyping, iteration, critical evaluation and risk assessment.


A range of assessment procedures will be used to meet the unit objectives consistent with University assessment requirements. Such procedures may include online safety modules, reports, examinations, tutorial exercises, practical design projects with folios and an examination. Assessment tasks will address all learning outcomes as well as relevant graduate attributes.

Overview of assessments

Hurdle Task:   OnGuard WHS online safet...

Hurdle Task:  

OnGuard WHS online safety training and testing record and practical demonstration of competency.

Weighting

Pass/Fail

Learning Outcomes LO2

Assessment Task 1: Metal design project 1 Require...

Assessment Task 1: Metal design project 1

Requires students to demonstrate the application of their developing design and production skills and knowledge.

Weighting

30%

Learning Outcomes LO1, LO2

Assessment Task 2: Metal design project 2 Require...

Assessment Task 2: Metal design project 2

Requires students to demonstrate developed knowledge, fabrication skills, and application of design thinking, including research, drawing, analysis/evaluation and communication skills.

Weighting

40%

Learning Outcomes LO2, LO3, LO4

Assessment Task 3: Examination Requires students ...

Assessment Task 3: Examination

Requires students to demonstrate their understanding of the relationship between theory and practice, including terminology, specifications, concepts and principles in relation to metal design, manufacture and finishing.

Weighting

30%

Learning Outcomes LO1, LO2, LO3, LO4

Learning and teaching strategy and rationale

A student-focused, problem-based learning approach is used in this unit. Students encounter concepts and principles of metal design and design theory through interactive lectures. Concepts are discussed and broadened through analysis of specific case studies and further informed by independent research during the development of design projects. In practical workshops, students design, manufacture and evaluate metal products. Design thinking skills in metal are introduced through a practice-oriented learning method. This method involves the parallel development of procedural and conceptual skills required for the design, development and documentation of metal material products in technologies. Students develop solutions to metal design problems using a design thinking methodology, developing conceptual knowledge in metal alongside procedural knowledge of metal material and manufacturing technologies through practical design projects. Students design, manufacture, communicate and evaluate items using principles of metal design. These methods enable the development of conceptual, procedural and professional knowledge and skill which allows students to practice design thinking and problem-solving in technologies contexts using metal materials.


This is a 10-credit point unit and has been designed to ensure that the time needed to complete the required volume of learning to the requisite standard is approximately 150 hours in total across the semester. To achieve a passing standard in this unit, students will find it helpful to engage in the full range of learning activities and assessments utilised in this unit, as described in the learning and teaching strategy and the assessment strategy. The learning and teaching and assessment strategies include a range of approaches to support your learning such as reading, reflection, discussion, webinars, podcasts, video etc.

Representative texts and references

Representative texts and references

Black, J., Kohser, R., & DeGarmo, E. (2018). DeGarmo's materials and processes in manufacturing (12th ed.). Hoboken, NJ: John Wiley & Sons.

Bohnart, E. (2018). Welding: Principles and practices (5th ed.). New York, NY: McGraw-Hill Education.

Brambatti, M., Vinci, C., & Possamai, A. (2018). Jewellery illustration and design: From technical drawing to professional rendering. Barcelona, Spain: Promopress.

Groche, P., Bruder, E., & Gramlich, S. (2017). Manufacturing integrated design sheet metal product and process innovation. Cham: Springer International Publishing.

Groover, M. (2019). Fundamentals of modern manufacturing: Materials, processes and systems. New York, NY: John Wiley & Sons.

Higgins, R. A., & Bolton, W. (2015). Materials for engineers and technicians (6th ed.). London: Routledge.

Jawalkar, C. S. (2016). Introduction to basic manufacturing. Oxford, England: Alpha Science International.

Lal, G., Gupta, V., & Reddy, N. (2005). Fundamentals of design and manufacturing. Harrow, UK: Alpha Science.

Maekawa, K., Obikawa, T., Yamane, Y., & Childs, T. (2000). Metal machining theory and applications. Burlington: Elsevier Science.

McGrath, J. (2007). The complete jewellery making course. Hauppauge, NY: Barron's.

Locations
Credit points
Year

Have a question?

We're available 9am–5pm AEDT,
Monday to Friday

If you’ve got a question, our AskACU team has you covered. You can search FAQs, text us, email, live chat, call – whatever works for you.

Live chat with us now

Chat to our team for real-time
answers to your questions.

Launch live chat

Visit our FAQs page

Find answers to some commonly
asked questions.

See our FAQs